{"product_id":"set-of-tools-in-tray-2-for-2600a-and-2600c-bb-crank-tools","title":"Set of tools in tray 2 for 2600A and 2600C - BB \u0026 Crank tools","description":"\u003cp\u003eBottom-bracket service and crank service share the same workflow: the cranks come off first, the BB comes out second, and the work is reversed for reinstall. Bundling the BB and crank tools into one tray means the mechanic pulls a single drawer for the workflow rather than two. The SET2-2600AC BB \u0026amp; Crank Tools tray for the \u003ca href=\"\/en-ca\/products\/professional-mechanic-workbench\"\u003eUnior 2600A\u003c\/a\u003e and \u003ca href=\"\/en-ca\/products\/master-workbench\"\u003e2600C\u003c\/a\u003e workbenches is sized for this combined-workflow purpose; a foam-cut tray dropping into the 990WD7 cabinet integrated into the 2600-series benches.\u003c\/p\u003e\n\u003ch2\u003eWhat this tray covers\u003c\/h2\u003e\n\u003cp\u003eThe tray is loaded with the Unior BB and crank service tool inventory: crank pullers, crank-cap tools, the full Unior BB socket range covering modern standards (16-Notch Hollowtech II, BB9000, BBR60, BSA30, FSA MegaEVO, T47, E13 and Hope, backed by two 12-notch wrenches and an 8-notch cartridge and Bosch lockring tool), plus the Hanger Genie 2.0 for the hanger-alignment check that closes out a crank job, and the 1\/2-inch ratchet and swivel handle that drive the sockets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTool category coverage:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrank cap and crank pullers\u003c\/strong\u003e; for the disassembly side of crank service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBottom-bracket sockets\u003c\/strong\u003e; eight aluminum sockets, from the Shimano patterns to E13, Hope and T47.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePro pedal wrench\u003c\/strong\u003e; for the pedal removal that often precedes a crank pull.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHanger Genie 2.0\u003c\/strong\u003e; the hanger-alignment gauge for the derailleur-hanger check that finishes a crank service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe tray ships with the empty foam shell; replacement shells available separately if the tool inventory shifts over time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote on the specific tool list:\u003c\/strong\u003e this tray is the current-generation successor to the \u003ca href=\"\/en-ca\/products\/set-of-tools-in-tray-2-for-2600a-us-or-2600c-us-drivetrain-tools\"\u003eSET2-2600AC-US Drivetrain tools tray\u003c\/a\u003e: that earlier US-catalog tray 2 is themed around drivetrain service — its 26-tool loadout includes the master chain tool and chain wear indicator — while this generation dedicates tray 2 to bottom-bracket and crank service. A few articles, like the 1609.1 crank cap tool, the 15 mm pro pedal wrench and the Hanger Genie, carry across both generations.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eSized for the bench-integrated 990WD7 drawer in the Unior 2600A and 2600C workbenches. Drops into the \u003ca href=\"\/en-ca\/products\/wide-tool-chest-7-drawers-990wd7-black\"\u003estandalone 990WD7 wide tool chest\u003c\/a\u003e for shops running the cabinet outside a bench.\u003c\/p\u003e\n\u003ch2\u003eBuilt in Zreče, Slovenia\u003c\/h2\u003e\n\u003cp\u003eUnior has been forging hand tools in Zreče since 1919, and sponsors professional road and mountain-bike race teams. The BB socket range carries the in-house Unior corporate spec phrasing for each cup pattern: 16-Notch covers Shimano Hollowtech II at the 16-notch tool-side engagement, BSA30 covers the BSA30 standard at the 30 mm-spindle envelope, T47 covers the modern T47 BB shell standard. Each spec is corporate-published, not generic.\u003c\/p\u003e\n\u003ch2\u003ePro tip from our mechanics\u003c\/h2\u003e\n\u003cp\u003eA BB-and-crank tray is one of the load-bearing drawers in a shop. Crank service is high-volume for any shop running cassette swaps as a recurring service line. Our broader workshop-setup guide covers the tray-loadout decisions and the day-one tray-order sequence: How to set up a professional bike workshop →\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhich Unior workbenches does this tray fit?\u003c\/strong\u003e It is sized for the Unior 2600A professional mechanic workbench and the 2600C master workbench, as a full-width tray in the 990WD drawer format with a 562 × 570 × 30 mm footprint. The foam shell itself (article vl2-2600AC, 560 × 570 × 40 mm) is listed separately in Unior's catalog as a replacement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the tray include a chain tool or chain wear indicator?\u003c\/strong\u003e No. The 25-item SET2-2600AC loadout is dedicated to bottom-bracket and crank service, so no chain tools are included. The previous-generation US-catalog tray 2 (SET2-2600AC-US) was themed around drivetrain service and did carry the master chain tool and a chain wear indicator — worth checking if you are matching an older bench setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich bottom bracket standards do the included sockets cover?\u003c\/strong\u003e Eight aluminum BB sockets ship in the tray — Shimano BB9000 and BBR60, BSA30, FSA MegaEVO, 16-Notch (Hollowtech II), E13, Hope and T47 — plus their retaining tool. Two 12-notch wrenches (46.3 mm and 48 mm), a cartridge bottom bracket wrench, a BB90 removal tool and an 8-notch cartridge and Bosch gen. 3 \u0026amp; 4 lockring tool round out the bottom-bracket side.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to supply my own ratchet to drive the BB sockets?\u003c\/strong\u003e No — the tray includes a 1\/2-inch reversible ratchet and a 1\/2-inch × 450 mm swivel handle, so the sockets are driven from the drawer itself. The crank side is equally self-contained: two crank pullers, Hollowtech II and SRAM DUB crank cap tools, and a 15 mm pro pedal wrench.\u003c\/p\u003e","brand":"Unior USA B2B","offers":[{"title":"Default Title","offer_id":46178633449708,"sku":"629834","price":733.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0464\/7708\/2777\/files\/set2-2600ac_629834_image_1024.jpg?v=1787173578","url":"https:\/\/b2b.uniorusa.com\/en-ca\/products\/set-of-tools-in-tray-2-for-2600a-and-2600c-bb-crank-tools","provider":"Unior USA B2B","version":"1.0","type":"link"}